New ESC / gots no throttle arghhh

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Julian

Active Member
Messages
610
Reaction score
335
Location
New Rochelle, NY
Arrma RC's
  1. Nero
ok - new Nero Esc arrived. Got it in - saved the old esc so matching the three wires to the three plugs correctly was a snap. Plugged in the lil wire to the receiver box. I put it above the servo wire. Turned on and got power Got steering no throttle. I messed with the transmitter every way. Usually comes on with the throttle knob.

Maybe I plugged it into the wrong slot in the receiver box?
 
ok - new Nero Esc arrived. Got it in - saved the old esc so matching the three wires to the three plugs correctly was a snap. Plugged in the lil wire to the receiver box. I put it above the servo wire. Turned on and got power Got steering no throttle. I messed with the transmitter every way. Usually comes on with the throttle knob.

Maybe I plugged it into the wrong slot in the receiver box?
Sure did. Slot number 3. Awesome running great !!!
 
Should be in slot 2 with the darkest wire facing towards the right. Also, if its a new ESC, then a throttle calibration should be done. Also check your throttle trim to see if its centered.

Nvm saw you got it going, happy bashing!
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top