Limitless Ok to use Locktite?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

stevenwm

Very Active Member
Messages
1,069
Reaction score
1,858
Location
Central Valley Ca
Arrma RC's
  1. BigRock 4x4
  2. Kraton 6s
  3. Mojave
  4. Senton 3s
  5. Typhon 3s
  6. Vorteks
Good afternoon hope you’re all having a great day!

Im Putting a new motor in limitless and wanted to make sure it’s ok to add locktite to the screws that mount the bracket to motor

Thank you

CFC9DF41-8DE1-487D-93CE-637BCF5828C4.jpeg
 
My general rule of thumb is any screw that goes into metal will get blue locktite.
 
General RC rules
1. Non moving metal to metal = blue (mounts, braces, towers etc)
2. Rotating/moving metal to metal = red (grub screws for pinions, spurs, etc....)

Any screw that has Loctite I use MIP wrenches on to avoid stripping the hex.

With that said I have never used Loctite for those screws into the motor from the motor mount.
 
General RC rules
1. Non moving metal to metal = blue (mounts, braces, towers etc)
2. Rotating/moving metal to metal = red (grub screws for pinions, spurs, etc....)

Any screw that has Loctite I use MIP wrenches on to avoid stripping the hex.

With that said I have never used Loctite for those screws into the motor from the motor mount.
Thanks you sir

Wasn’t sure if it would be idea for the motor
My general rule of thumb is any screw that goes into metal will get blue locktite.
My general rule of thumb is any screw that goes into metal will get blue locktite.
Thank you sir!
 
I use blue locktite on anything metal to metal. Have seen to many failures do to screws backing out.
 
Back
Top