veerockher
Active Member
I have converted my Typhon 3s to a 8s conversion. I am running a Specktrum 160a ESC with a Specktrum 1250kv motor, with the Specktrum DX3S receiver. I have got a 26 tooth pinion gear with a 57 tooth spur gear. I have put aluminum arms on the front and back, aluminum driveshaft, metal steering links, aluminum alloy steering assembly, HR 17mm 10mm extension hubs, and a active aluminum rear spoiler. I have got it all together today and I have not ran it yet but it was working properly so for without a test run. I have put the metal differential gear in the back of the vehicle. This is the third time that I have built this car, the first time I crashed it into the curb at about 35mph in my parking lot and broke the front right off and the stock shocks burst open and leaked all over. The second time I tried to run it on 6s and I was at a trucking company in the parking lot and I didn’t have enough room for breaking the car with the stock Typhon tires on it so it slid about 20ft before it turned sideways and then slid backwards into the curb and broke the rear of the chassis clear off. It was a epic crash I wish I had video taken of it. I now have it put together and before I had put the new Arrma metal differential gear and the new awesome G Force cooling fans (please let me know if you want the contact information for the fans) I had a chance to run it on 6s and she was violent it was putting down so much power. If anyone has any information or questions on the build please let me know what I can do to make it better. I have got some videos on my Instagram but I will be trying to post on the site or to YouTube so that everyone will be able to view them.
Thanks
Thanks