One Handed Thumb Steering

[LudeNation]

**HELP NEEDED**
Looking for a 3d printable 1 handed thumb steering attachment for the Arrma SLT3 remote(57mm wheel). I can only find ones for the Arrma DX3(55mm wheel). The "universal" is to small only has a max ID of (33mm)
Anyone have any leads. *Pictures below for reference.*

 

[#ARRMArcfanboy4life]

Nice ROG keyboard. I would just put a screw into the wheel. This isn't a super fancy remote.

 

[grihn]

Measure the wheel without the foam...I'm betting it's 55mm.

 

[gotnitro]

I thought the pistol grip TX's of today were already pretty easy for lazy a$$'s. Now to add a single hand contraption to an already elementary TX is fuggin hilarious!

 

[LudeNation]

Nice ROG keyboard. I would just put a screw into the wheel. This isn't a super fancy remote.

Like this or is there other options?

Measure the wheel without the foam...I'm betting it's 55mm.

47mm without the foam.

Measure the wheel without the foam...I'm betting it's 55mm.

47mm without the foam.

I thought the pistol grip TX's of today were already pretty easy for lazy a$$'s. Now to add a single hand contraption to an already elementary TX is fuggin hilarious!

Sucks you feel that way.

 

[#ARRMArcfanboy4life]

Just like that. ^

 

[gotnitro]

Like this or is there other options?

View attachment 213334

47mm without the foam.View attachment 213336

47mm without the foam.View attachment 213336


Sucks you feel that way.

What's going to suck for you is when you crash it and blame your single hand without posting about it.

 

[LudeNation]

Huh?

 

[AIan]

maybe you could take a yoga block and cut a different piece of foam that had a nob for the thumb on it then tack it to the remote with some glue

 

[grihn]

I can send you this if you want/need. it's from a DX3 that came with a Capra, but I think it should bolt right up to an SLT3 (I've got one somewhere around here, I can confirm after I look for/find it). It would just replace the whole wheel. PM me if you want it, no charge.

 

[Sandracer_NL]

Looking for a 3d printable 1 handed thumb steering attachment for the Arrma SLT3 remote(57mm wheel). I can only find ones for the Arrma DX3(55mm wheel).

If you are able to press the foam 1mm you’ll have the 55mm diameter. Other option is to take a file and file 1mm of the foam.

 

[LudeNation]

What's going to suck for you is when you crash it and blame your single hand without posting about it.

I can send you this if you want/need. it's from a DX3 that came with a Capra, but I think it should bolt right up to an SLT3 (I've got one somewhere around here, I can confirm after I look for/find it). It would just replace the whole wheel. PM me if you want it, no charge.

View attachment 213337View attachment 213338

Bro THANK YOU SO MUCH! I would love to get that from you. If you could please post a comment when/if you happen to find it,

 

[LudeNation]

If you are able to press the foam 1mm you’ll have the 55mm diameter. Other option is to take a file and file 1mm of the foam.

Going to upsize the print 1mm so I don't have to cut anything.

 

[Tex Koder]

This may work better >

https://www.thingiverse.com/thing:4737290

 

[LudeNation]

This may work better >

View attachment 213369

https://www.thingiverse.com/thing:4737290

I need the thumb knob, thank you for sharing this.

 

[Dutch]

A little cleaning up, replace the duct tape with a hose clamp and Voilà

 

[gotnitro]

I’ll wait for the one hand thumb steering broken parts thread

 

[LudeNation]

A little cleaning up, replace the duct tape with a hose clamp and Voilà
View attachment 213754

If it works it works!

 

[Jeremy Stone]

727rc has been making really nice ones for the Traxxas remotes for awhile. It’s one screw to remove/replace the whole plastic wheel under the foam and the your stock foam slides back on. They’re amazing and come in all different colors.

 

[AIan]

Cool, but I have enough difficulty with two hands
I’m old and decrepit lol 45 goin on 80