Big Rock Outcast 4S Roll Bar on Big Rock

[Adamj804]

If you have installed a roll bar on your Big Rock, what size drill bit did you use to drill the holes for it?

 

[PatMarcus172]

Have one on order. Due to arrive this week. Will report back when its here.

 

[Kla912000]

I used a 1/16 drill bit to drill thru the body of my Big Rock but used a 3mm screw to screw the roll bar on.

 

[PatMarcus172]

I used a 1/16 drill bit to drill thru the body of my Big Rock but used a 3mm screw to screw the roll bar on.View attachment 144792

Yeah. That makes good sense. Its what I used to fit my body protectors. Looking nice !!!

 

[Adamj804]

I’m thinking about getting the maxx roof protector for mine as well. They are out of stock right now.

 

[Kla912000]

Yeah. That makes good sense. Its what I used to fit my body protectors. Looking nice !!!

Thanks! Good luck putting it on when you get it. It's pretty easy. There will be 2 upper cab supports on the front of the roll bar. All I did was nipped them off and just used 4 screws to bolt it to the bed rails. You'll see what I mean when you get the roll bar.

 

[kicker0927]

I used a 1/16 drill bit to drill thru the body of my Big Rock but used a 3mm screw to screw the roll bar on.View attachment 144792

So did you just use like an m3x8mm screws to secure the 4 spots on the roll bar and cut the two upper cab braces off?
Would these work to secure the 4 roll bar posts on the Big Rock V3?

https://www.ebay.com/itm/393571344934

 

[winterlong75]

I’m thinking about getting the maxx roof protector for mine as well. They are out of stock right now.

I used the RPM skid rails and they have worked really well... $11 and in stock at amain.