Outcast Outcast 6s diff removal.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

piccopower

Member
Messages
40
Reaction score
39
Arrma RC's
  1. Outcast 6s
Would someone steer me to a walk through or video on this please. I have looked and searched but cant find one specific.
I want to take my diffs apart and see if they need shimming.
 
I just did this for the first time on a Kraton. The manual does a pretty good job of showing what needs to be removed to get to all 3.

DO NOT STRIP the 3 screws going into the motor mount. There should be Lock Tight on these and will likely require heat to break free. A soldering iron worked perfect for me. When you reassemble, put blue Lock Tight on these 3 screws.

Do one diff at a time and keep the parts in order.

It's a lot more intimidating than it is hard. After you tear them down you'll see it's quite easy.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top