Outcast Outcast 6s rear diff wear

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Middy0789

Fairly New Member
Messages
5
Reaction score
1
Arrma RC's
  1. Outcast 6s
Hi everyone
Had a clicking from the rear diff and found the spiral gear has a few worn teeth so I’m going to replace, but upon cleaning up the diff housing I found some wear as shown in picture. Is this normal or do I have some play somewhere which has led to the spiral gear making contact? How can I correct this?
Thanks in advance!
41024
 
That's normal.

You ever hear a high pitch zinging noise for a split second when it take a hard nose or tail landing?
That's what the noise is ?
Ring gear making contact with the chassis
IMG_0377.JPG
 
Good to know thanks a lot, i’m a newbie to all this ? do you know the part number for rear ring gear? And what oil thickness would you recommend?
 
AR310497

Oil thickness comes down to driver preference but a good range to stay within for the rear would be 10k-30k
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top