Infraction Part by part hand built one piece at a time and the start is mostly from spare parts

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Little more work and some electronics. I like the center bracing really lokoks good. Waiting on JRC to get the rear and front bottom pieces in and it will appear more complete. Shocks up next.

View attachment 157174

View attachment 157175
She's coming along! Do you print the extended side skirts, as I know you had also sent me the red front wheel dams so was wondering?
 
She's coming along! Do you print the extended side skirts, as I know you had also sent me the red front wheel dams so was wondering?
Yes sir, some left overs. I had to regrettably give up the 3d printer due to the smell even though it had a cover. (Wife)
 
Ok, well that stinks, pun intended🤣, sure is coming along though👍 wonder if I'll get my SWB project done before ya lol I'm about 3/4 done just need things here and there like you
IMG_20210708_131148941.jpg
 
I kept breaking printed skirts so I swapped to CF parts instead.
I printed mine with CF continuous carbon fiber . Haven't had a failure yet. My Felony has CF skirts. Speaking of CF.
Brace added , $10.50 tube over the red aluminum.

20210710_164441.jpg

Ok, well that stinks, pun intended🤣, sure is coming along though👍 wonder if I'll get my SWB project done before ya lol I'm about 3/4 done just need things here and there like you View attachment 157184
We're are both making good progress for sure. Shocks /cvd/shafts and front and rear plastic and done.
 
Servo installed and carbon fiber center brace with HD end pieces. GC style fans installed, no heat sink on motor want to try and run it without and check temps. All parts ordered from JRC . Ted from there is awesome!! Emailed with questions and slight issue. Bam taken care of. Should have this complete Saturday if parts arrive then. Carbon fiber tube off Amazon. 10mm x 8mm 430mm cut to length. Then slide it over the stock one for extra protection. Or 8mm x 6mm with 6mm inserts with no stock brace.

20210715_141427.jpg
 
It is finished. Parts arrived today. I made 1 mistake surprised it was caught in the pics. I won't mention it right away and see if anyone can guess. About mid build I made the blunder. Which is ok that is why I did this. Too learn and see what it takes to build. Tomorrow or Wednesday, cutting CF for the car. Bench tested so far performed well.

IMG_20210719_182802999_HDR.jpg


IMG_20210719_182755857_HDR.jpg


IMG_20210719_182049413.jpg


IMG_20210719_182045495.jpg


IMG_20210719_161517946_HDR.jpg
 
Wow, that's really a great build. Looks like you were able to bump the timeline up alot.
Thank you very much. I was thanks to my wife and her O.T. ! Around 40 hours worth. Extra $$ last 2 checks.
 
A few more pieces added, self made. Left overs when I had a 3d printer. Gave it up the smell bothered the wife. Mismatched color on purpose I have matching sets. And a carbon fiber on the chassis for protection. Will add more as it progresses. JRC parts will be here by the weekend. Sunday or Monday will see an update. Went to buy a diff with housing but sold out at JRC. And a carbon fiber RX box cover. Purchased not made by myself. Center braces will be a few weeks. From AliExpress saved a little money 💲 worth the wait.

View attachment 155176

View attachment 155177
Skirts on the wrong sides? 🤷🏻‍♂️
 
Damn ya beat me! Lol but to my credit I'm still waiting on my paint from Amain ordered last Monday and still hasn't shipped I'm pissed! Shipping label created the 12th and still hasn't shipped as of this evening like WTF!! Otherwise just waiting on a servo horn and shock covers from @Sphexish in the mail and to solder the ESC bullets from 4mm to 6.5 and install reciever 👍
Build turned out great brother great job!
 
Damn ya beat me! Lol but to my credit I'm still waiting on my paint from Amain ordered last Monday and still hasn't shipped I'm pissed! Shipping label created the 12th and still hasn't shipped as of this evening like WTF!! Otherwise just waiting on a servo horn and shock covers from @Sphexish in the mail and to solder the ESC bullets from 4mm to 6.5 and install reciever 👍
Build turned out great brother great job!
I already had a body and didn't need to paint. So that helped move the timeline. Can't wait to see yours finished.
 
New fan covers and new heat sink fan holder not much of a heat sink. And center differential cover. More parts going to be swapped out in the near future. And a new Leopard motor in red 2050kv recommended by @jondilly1974 I think off hand?? And metal center diff black/red.

IMG_20210927_122927491.jpg


IMG_20210927_123019699.jpg
 
Last edited:
Finished except for the new chassis, I hope to have it soon. I do not want the arms etc in aluminum. I think this is a good balance of red/black.



IMG_20211004_155705299.jpg


IMG_20211005_095845374_HDR.jpg


IMG_20211005_095835311_HDR.jpg


IMG_20211005_095859560_HDR.jpg


IMG_20211005_095854204_HDR.jpg
 
Last edited:
Back
Top