Perfect Pass chassis pure pleasure and the configurations are limitless

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Boggs3010

Very Active Member
Rig of the Month Winner
Messages
1,838
Reaction score
3,048
Location
Ms
Arrma RC's
  1. Felony
  2. Fireteam
  3. Infraction
  4. Limitless
  5. Vendetta
Although I went stock for now with a few minor adjustments. Will swap motor and ESC eventually and motor mount very soon. No fitment issues as half of the stock holes are missing such as battery trays esc holes and front and rear brace holes. Battery strap holes are in place and or double sided tape is what Raz uses. Chassis feels very sturdy ( braces not needed) and the layers appear to be flawless. The chassis did arrive with a few scratches unfortunately. I had already a PP center brace and splitter and used those in this build. Future changes coming. Any constructive criticism or ideas please share.

IMG_20231227_133818.jpg


IMG_20231227_142016.jpg


IMG_20231227_133814.jpg


IMG_20231227_142111.jpg


IMG_20231227_142021.jpg


IMG_20231225_132649.jpg
 
Last edited:
Now you need some prettier components to go in there like a Scorched motor mount, driveshafts, a TP Power motor, and XLX2 esc ;)
Looking better, PP driveshafts and servo. Hobbywing max 6 and more parts in route. ( maxed out for a month or 2 on the rc budget)

IMG_20240112_145911.jpg


IMG_20240105_122525.jpg
 
A few up grades . Carbon towers / rear aluminum suspension mounts / PP arms all around / center diff aluminum top /Aluminum Rear Hubs Stub Axle Carriers

Everything was a breeze to mount except rear hubs had to grind the sides a few thousandths. The PP arms are snug. Stock being plastic were ok to push slightly force in place.

Should add this to the build section?

IMG_20240124_154015.jpg


IMG_20240124_160507.jpg


IMG_20240124_153941.jpg


IMG_20240124_153948.jpg


IMG_20240124_113905.jpg


IMG_20240124_154004.jpg


IMG_20240124_153952.jpg
 
They are version 1 and still use OEM parts. @RCSid
Next up some new hardware. Screws etc...keep me busy and cheap.
 
Titanium screws, more coming to complete the look. Just the flat heads are titanium, the rest are painted gloss black. ( Save $$ tbh) they add what 2 or 3 mph? Next up is a motor that will be months away. No hurry as it is still winter.
Never realized how bad my old hardware looked until I took a picture with the flash on.

IMG_20240211_155017.jpg


IMG_20240211_154806.jpg


IMG_20240211_154811.jpg


Almost forgot these, never saw anyone use these before.
 

Attachments

  • 17076891081225829736712957980851.jpg
    17076891081225829736712957980851.jpg
    393.5 KB · Views: 4
  • 17076891262934316796971366650419.jpg
    17076891262934316796971366650419.jpg
    283 KB · Views: 6
Back
Top