Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Do not use the L shaped hex wrenches, as they will strip screws. Most importantly, use a high quality hex driver that fits tight in the screw head. Also, Arrma uses red threadlock on the pinion, so heat is required to remove it. I was worried about removing the pinion grub screw myself, but used my solder gun (with adjustable heat) & I also have 10 solder tips to choose from. Using a solder tip that fit tightly into the screw head, I easily removed my pinion grub screw in less than 10 seconds. I was amazed how well this method worked. Tip, some of my hex drivers have 2 parallel holes on the end of the handles, and I just insert a long L shaped wrench through it, which allows for much more torque, when loosening or tightening the hex screws. This will ensure you do not use the included L shaped hex wrenches to remove any tight screws.Hi any ideas how to remove pinion gear the grub screw is stripped any ideas?
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!