Please help throttle on steering knob DX5C

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Messages
292
Reaction score
212
Location
Lincoln, CA.
Arrma RC's
  1. BigRock
  2. Kraton 8S
  3. Mojave EXB
So I had to instal a new ESC (MMX 8S) because of that i seemed like I had to re bind the receiver to my transmitter. When I bind my DX5C to my 6100 AT it has no steering and the throttle is controlled by the steering knob. What am I doing wrong?
 
Probably switched the esc and servo on the receiver. Open the receiver and switch the plugs. Servo should be channel 1 servo channel 2
Probably switched the esc and servo on the receiver. Open the receiver and switch the plugs. Servo should be channel 1 servo channel 2
Esc channel 2
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top