Kraton Problems with Kraton 6s

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

unvxlid

Fairly New Member
Messages
6
Reaction score
1
So I’m assuming I didn’t calibrate something right along the way. So every time I power up my Kraton 6s WITH OUT the transmitter being on it powers up just fine and somehow connects to a transmitter. But when the transmitter is on the esc won’t power up unless I turn my steering wheel all the way to right? Not sure what I did wrong as I followed instructions
 
Try unplugging the steering servo from the receiver. Does the esc work as
Try unplugging the steering servo from the receiver. Does the esc work as normal?
From what I can tell yes, when I unplug steering servo it boots up fine & connects to receiver w out me using the steering like I had to do before. But if I plug back it back in I still cannot use steering and if I do turn wheel it reboots back up.
To add if I use throttle it just reboots, sometimes it finishes the process and I’m able to go in reverse or forward for a moment but then reboots again
 
The servo has been causing all sorts of issues with the ESC's recently. Toss the servo and buy a new one (DS3235KG on Amazon or banggood for example) or warranty it through HH. Even if you warranty it, I'd still replace the servo personally.
 
The servo has been causing all sorts of issues with the ESC's recently. Toss the servo and buy a new one (DS3235KG on Amazon or banggood for example) or warranty it through HH. Even if you warranty it, I'd still replace the servo personally.
Would this being unplugged have anything to do w it ?

FF35F195-43CD-40C8-8CF3-785AB7A1E077.jpeg
 
Sounds like a bad servo. The factory ones have been causing these issues. You can warranty it if applicable. Otherwise do yourself a favor and toss it in the trash.

People seem to like this one for a budget servo

https://www.amazon.com/Youleke-Torque-Digital-Servo-Horn(270°)/dp/B088BKJXVY/ref=sr_1_5?dchild=1&keywords=25t+servo&qid=1619232208&sr=8-5

or this one JX Servo CLS-HV7346MG (i have 2 of these)

https://www.amazon.com/gp/product/B07PSLDDRD/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

This Savox is pretty popular for monster truck type bashers, Savox 1210sg

https://www.savoxusa.com/products/savsw1210sg-waterproof-coreless-digital

I picked up this one a month ago after breaking the stock one, then the JX linked above, Protek 370TBL

https://www.amainhobbies.com/protek...ue-brushless-crawler-servo-ptk-370tbl/p532334

Here is another upper end popular servo, Savox 2290sg

https://www.amainhobbies.com/savox-...shless-steel-gear-servo-sav-sb-2290sg/p536890

This guy has some good videos


Checkout this playlist, he does a torque test on the servos listed above and many more.

https://www.youtube.com/playlist?list=PL5BftdlCQhcOh8JNVqrg1yenQn3jmhJw2
 
Sounds like a bad servo. The factory ones have been causing these issues. You can warranty it if applicable. Otherwise do yourself a favor and toss it in the trash.

People seem to like this one for a budget servo

https://www.amazon.com/Youleke-Torque-Digital-Servo-Horn(270°)/dp/B088BKJXVY/ref=sr_1_5?dchild=1&keywords=25t+servo&qid=1619232208&sr=8-5

or this one JX Servo CLS-HV7346MG (i have 2 of these)

https://www.amazon.com/gp/product/B07PSLDDRD/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

This Savox is pretty popular for monster truck type bashers, Savox 1210sg

https://www.savoxusa.com/products/savsw1210sg-waterproof-coreless-digital

I picked up this one a month ago after breaking the stock one, then the JX linked above, Protek 370TBL

https://www.amainhobbies.com/protek...ue-brushless-crawler-servo-ptk-370tbl/p532334

Here is another upper end popular servo, Savox 2290sg

https://www.amainhobbies.com/savox-...shless-steel-gear-servo-sav-sb-2290sg/p536890

This guy has some good videos


Checkout this playlist, he does a torque test on the servos listed above and many more.

https://www.youtube.com/playlist?list=PL5BftdlCQhcOh8JNVqrg1yenQn3jmhJw2
Hey there, what type of mount set up you using for that JX 46 KG servo, I've got q kraton v5
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top