Programming the blx 185 esc

[Typhon]

I recently acquired an Arrma Typhon and am running 4s Lihv packs in it. Arrma responded back to me and said the cutoff is set at 3.2v or 12.8v for my 4s pack. At that voltage my packs will kill themselves being as lihv packs have a minimum of 3.5v per cell which needs 14v as my cutoff or higher. So the bottom line is i need to see if i can up the cutoff on this ESC. I'm fairly new to the electric RC world (Less than a year). My question for the community: is there a way to manually program it or do i need some sort of program card from hobbyking/arrma? I really don't want to kill my new $50 batteries so i appreciate all the help guys

 

[Jerry-rigged]

I don't think it can be changed on the Arrma branded hobbywing ESC's. You will need to use an external LVC alarm, similar to what the flyers use. They don't want an LVC to crash them, so they use timers and loud LVC alarms.
http://www.hobbyking.com/hobbyking/store/__74024__HobbyKing_8482_Lipo_Voltage_Checker_2S_8S_.html