Kraton Rear Hub Spacer Differences

[AceM]

So i was working on my rear and lost a 1mm spacer which apparently comes in this part
https://www.arrma-rc.com/part/AR330404

There is another that is 2mm, which goes on the other end, im confused as to why they would use 1mm x 2 on a side and then 2mm on a side if it will still equal 2mm

 

[Dietrich_40]

From the way it was explained to me it to be able to adjust it more easily. Taking one out or flipping to adjust for speed runs vs bashing. I don't remember specifics but pretty sure it's on a thread on here.

 

[AceM]

Ahh gotcha that makes sense, i didnt realize people take them out for different uses, i thought it was a shim type deal similar to diffs

Which material are these of, would you happen to know?

 

[dpricenator]

LOL I used the bushings from the Bell crank assembly, when I lost mine. It was easy, because I was replacing the Bell Crank at the time I lost them. Seemed to work fine. I say, you put a couple washers in there and move on.