Oven baked way works. Biggest tire I baked off was Xmaxx, where gloves when removing.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
I presume factory glued as well (stock Traxxas wheel)?
I will give it another try tomorrow.
To be continued...
Wrap tire an wheel in aluminum foil,place in oven.warm oven up to 350 for 10to20 min. Take out an start to try an pull off. Check a you tube video,think that's where I seen this too. Lot of help with radio control on you tube.
I had a second try putting the remaining pair of wheels in the oven.
This time a gave it 10degC more (160degC), pre-heated and a full 15 minutes.
When I opened the door, I was a bit worried because white smoke came out.
This time I did wore protective gloves, and again the outside of the tire came of easily. And the inside would not move a micron! Really well bonded.
No idea why this is, nevertheless I have saved both rims and tires.
Check out the amount of sand and debris, which came out! Amazing, is it not?
Downside is that the two closed cell inserts are ruined because they had been in the tire for more then six months with this crap. When you squeezed the tire, you could not compress it. Here you see why.
The other set's inserts are perfectly fine.
Maybe I put in some new ones if I can get my hands on a set soon.
But surely I will close the venting holes in the rim, and puncture four small holes in the outside of the tire.
This time a gave it 10degC more (160degC), pre-heated and a full 15 minutes.
When I opened the door, I was a bit worried because white smoke came out.
This time I did wore protective gloves, and again the outside of the tire came of easily. And the inside would not move a micron! Really well bonded.
No idea why this is, nevertheless I have saved both rims and tires.
Check out the amount of sand and debris, which came out! Amazing, is it not?
Downside is that the two closed cell inserts are ruined because they had been in the tire for more then six months with this crap. When you squeezed the tire, you could not compress it. Here you see why.
The other set's inserts are perfectly fine.
Maybe I put in some new ones if I can get my hands on a set soon.
But surely I will close the venting holes in the rim, and puncture four small holes in the outside of the tire.
- Messages
- 1,154
- Reaction score
- 1,084
- Arrma RC's
This picture should be placed in the thread titled EXPLAIN THE NEED TO VENT TIRES.
I used my Weber gas grill. Wrapped tires in foil, preheated grill to 350 Fahrenheit, placed on top rack. I checked every 5 minutes. Probably took 25 till they started popping off. Very easy, no smell in the house.
Tires, wheels, and foams all in tact. These are stock Rock Reys.
Tires, wheels, and foams all in tact. These are stock Rock Reys.
Plan a: saws all
Plan b:what ever the right way is
Plan b:what ever the right way is
