Kraton Roll cage problem!!!

[NewKratonuser0311]

I installed a new hot racing motor mount and new hot racing center diff mount and new hot racing gear cover. Will I be able to fit the roll cage I’m having trouble getting it back on. Is there a way to do it??

 

[Rcproponent]

I installed a new hot racing motor mount and new hot racing center diff mount and new hot racing gear cover. Will I be able to fit the roll cage I’m having trouble getting it back on. Is there a way to do it??View attachment 228256

That is the old style top piece for the older models from what I can tell. In order to use the roll hoop you need this part: https://www.towerhobbies.com/produc...2rX1ECd2q5Hraa5qiKr1zUUbYPkeSHKUaAim0EALw_wcB

 

[NewKratonuser0311]

That is the old style top piece for the older models from what I can tell. In order to use the roll hoop you need this part: https://www.towerhobbies.com/produc...2rX1ECd2q5Hraa5qiKr1zUUbYPkeSHKUaAim0EALw_wcB

Ok next question? Do I have to remove the motor mount and diff mount all over again or does this gear cover fit right on top??

 

[KevinC]

It fits right over the top

.....if you haven't bought this as well, you should....
https://www.ebay.ca/itm/40293331151...RupdolpyZxBTW4fq0aYX6VEceIhNAkAgaAh8WEALw_wcB

 

[Rcproponent]

Ok next question? Do I have to remove the motor mount and diff mount all over again or does this gear cover fit right on top??

Right on top

 

[rcastello755]

Where did you get the fans.

 

[NewKratonuser0311]

It fits right over the top

.....if you haven't bought this as well, you should....
https://www.ebay.ca/itm/40293331151...RupdolpyZxBTW4fq0aYX6VEceIhNAkAgaAh8WEALw_wcB

It fits right over the top

.....if you haven't bought this as well, you should....
https://www.ebay.ca/itm/40293331151...RupdolpyZxBTW4fq0aYX6VEceIhNAkAgaAh8WEALw_wcB

Where did you get the

View attachment 228275

Where did you get the fans.

power hobby dual turbo fans amazon

Right on top

Does it work w this style motor mount I just thought about it. This motor mount and center diff mount might be for the Typhon

 

[KevinC]

I can’t answer that for sure, but I assume it would fit on this motor mount. The 6s line carries common mount sizes.,,,,,Kraton outcast, Talion, Typhon, so the HR mount you are using should accept the diff cover the @Rcproponent mentioned above.

cheers,
kev

 

[NewKratonuser0311]

I can’t answer that for sure, but I assume it would fit on this motor mount. The 6s line carries common mount sizes.,,,,,Kraton outcast, Talion, Typhon, so the HR mount you are using should accept the diff cover the @Rcproponent mentioned above.

cheers,
kev

Thanks I guess I’ll find out in a few days

 

[NewKratonuser0311]

Where did you get the fans.

Amazon

 

[slick2500]

That is the older style (V1-V3) motor mount that you bought so no the part that @Rcproponent linked to will not work with it as that part is for the newer style (V4+) motor mount https://hot-racing.com/?partnumber=AON38F02;c=926 The part that @KevinC linked to will not work with that mount either.

 

[Rcproponent]

That is the older style (V1-V3) motor mount that you bought so no the part that @Rcproponent linked to will not work with it as that part is for the newer style (V4+) motor mount https://hot-racing.com/?partnumber=AON38F02;c=926 The part that @KevinC linked to will not work with that mount either.

Whoa! They knocked off the Pps mount!

 

[NewKratonuser0311]

That is the older style (V1-V3) motor mount that you bought so no the part that @Rcproponent linked to will not work with it as that part is for the newer style (V4+) motor mount https://hot-racing.com/?partnumber=AON38F02;c=926 The part that @KevinC linked to will not work with that mount either.

Ok I’ll order that motor mount or just use the stock mount and new diff mount. Thanks for the input I was waaayy off lol. It’s a learning curve.

That is the older style (V1-V3) motor mount that you bought so no the part that @Rcproponent linked to will not work with it as that part is for the newer style (V4+) motor mount https://hot-racing.com/?partnumber=AON38F02;c=926 The part that @KevinC linked to will not work with that mount either.

yeah it could also work on the Typhon 6s because it’s less bulky so I might switch this to Typhon since it doesn’t have a roll cage. If im not bashing the kraton too hard do I need The roll cage