RPM Bumper Mod and Wheels

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Ryambo

Active Member
Messages
80
Reaction score
307
Location
Washington
Arrma RC's
  1. Kraton 6s
  2. Typhon 6s
  3. Typhon 3s
I modified the RPM bumper with a tab and cage for an LED light bar, which is a part I've wanted for a long time now. My buddy is going to print it in Onyx for me. The wheels are just for fun. I'll post back when I have some actual parts.

TB12.jpg
TW12.jpg
 
I modeled my light bar and created an assembly to work on clearance today. The vertical braces had to move to the outside of the mounting holes and the upper bar moved up a little. With that sorted I also simplified geometry where the vertical braces transition to the upper bar to have a simpler appearance, and made the LED tab profile reflect the lower bar. The light is well recessed for protection but unobstructed so it shouldn't have any harsh edges when turned on at night. I plan to sit on it for a few days to make sure I'm happy with it, then work on getting it printed.

TBL2.jpg
TBL3.jpg
TBL4.jpg
TBL5.jpg
TBL1.jpg
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top