Kraton Savox SW1210SG Waterproof Metal Gear Digital Servo - 20kg - 0.15s

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

baz2011uk

Member
Messages
27
Reaction score
5
Arrma RC's
looking at replacing my servo as mines broke ops
seems this looks a good fit savox SW1210G anyone else running one? how much better is this than stock?
is this a direct swap or will i need any spacers?

is there any other options i may of missed for this kind of budget i can pick one up for £65

also seen this for penny's worth getting one as a backup?
https://www.ebay.co.uk/itm/Power-HD...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649
 
any input? not seen a sero thread for the kraton in 2018 just wondering if the above is ok or if there is a better option since the older threads i have read
 
Just put the sw-1210 in my outcast. I love it running proline trencher 3.8 and has plenty of tourqe and it is way faster then the stock servo
20180217_074308.jpg
 
Purchased one this week. Just need to install. Good to hear that it hooks up clean.
 
Clean and super easy and is absolutely amazing. Just finished my 3rd bash with this servo and it swings so much tighter and swings so fast compared to the way it used to makes me wanna challenge a couple truggy guys I kno lol
 
Any servo options from the typhon owners
For bashing better than stock
Off road racing medium to large jumps
On road
Thanks in advance for any help
 

Attachments

  • 2F58FBF8-D9C6-4734-9E94-013D39F4CD8B.jpeg
    2F58FBF8-D9C6-4734-9E94-013D39F4CD8B.jpeg
    262.1 KB · Views: 71
  • F72C7C7F-9C08-4797-9C86-873023668C51.jpeg
    F72C7C7F-9C08-4797-9C86-873023668C51.jpeg
    255.7 KB · Views: 76
  • EDB2AFA4-1AC1-4AE8-B7C7-14AC55C8B547.jpeg
    EDB2AFA4-1AC1-4AE8-B7C7-14AC55C8B547.jpeg
    266.6 KB · Views: 74
  • C8000DB7-F461-4BA1-A5A8-52AFC2970CE9.jpeg
    C8000DB7-F461-4BA1-A5A8-52AFC2970CE9.jpeg
    226.9 KB · Views: 71
  • E4C4D560-134C-4437-B389-A8307D7F349D.jpeg
    E4C4D560-134C-4437-B389-A8307D7F349D.jpeg
    218 KB · Views: 77
  • 4DC07C60-D70B-4278-9C70-F5D4C230BE63.jpeg
    4DC07C60-D70B-4278-9C70-F5D4C230BE63.jpeg
    232.6 KB · Views: 68
  • 91ED24BA-4522-4540-A79E-A0A0D1189905.jpeg
    91ED24BA-4522-4540-A79E-A0A0D1189905.jpeg
    340.7 KB · Views: 75
  • 5274A840-8D08-42D4-9536-B4AEABBC28CF.jpeg
    5274A840-8D08-42D4-9536-B4AEABBC28CF.jpeg
    168.4 KB · Views: 73
Stock servo quit, so picked up Savox SW-1210SG Servo from Amazon. It's a bit taller than stock so servo mount legs (servo mount is a new GPM, but its legs are exact height as the stock mount) won't reach the chassis. It seems that spacers are needed, but they don't come with the Savox. Also, since the servo is taller, its spline will also be taller, thus, throwing off the alignment with the servo horn. Should I return the Savox or use spacers? What spacers to use?
29486
29487
 
I used this servo in my Kraton, and don't remember an issue with my voltage hobbies mount, I recently removed it to use it on my TLR 8ight truggy. Sorry I can't think why it is so tall. Does it stick down this far with the stock servo mount? I read you say the legs are the same length but is the thickness of the mount the same?
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top