Kraton Senton diff in front, Kraton in Rear

[Jaymelz324]

sup guys question... I have a senton I that i replaced the rear diff in with kraton spiral cut gears. Is anything being damaged due to the difference between the front and rear gear ratios?

 

[Surchaufeur]

Mhm the exb diff? If they are the same diff but just spirsl cut i think it should be fine

 

[Soppy]

The front ratio is 3.31 to 1 and the rear is 4.30 to 1. This may cause the front wheels to slip and the rear wheels to drag. I t will also cause increased wear on gears inside the center diff. The car is definitely going to have some handling issues.

 

[Jaymelz324]

Thanks for the reply.. Im going to change out the front input gear and diff also

 

[nino]

You are effectively adding front overdrive... It's often used in crawlers for a tighter turning circle and easier getting over obstacles. But rarely with 6s power so I'd advise against it in a Senton
You could try it out on a loose surface, just for the heck of it.

 

[Jaymelz324]

I should have clarified that this USED to be a senton, but i converted to outcast with bigger tires and all that