Servo or Remote on Small scale Axial Crawler bugging out

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Arrmahelpmeplease

Active Member
Messages
125
Reaction score
122
Location
Austria
Arrma RC's
  1. Infraction
  2. Kraton 6s
  3. Senton 3s
Hello!
Decided today that i wanted to use my small crawler today to see if everything still worked after half a year. Sadly i found out that my crawler is bugging. Its servo twitches and th car also moves back by itself sometimes. Also noticed that the CH4 channel (which is only for lights) on the remote makes the car drive forward to the left. I would switch the servo but the thing with drving backwards and the CH4 bug. The remote doesn't have software to change the functions of the buttons either. don't know what the hell happened. Everything stops once the remote is OFF.
Thanks in advance for any answers!
 
Wonky servos can cause all kinds of weird behavior. Unplug the servo, and see if the issues go away. This is often the case.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top