Talion Servo saver adjustment question

[Finfan88]

Is there supposed to be some up and down play where the spring and nut adjustment are. Or should I tighten up the nut?

 

[Notorious J]

Full tight will give you great steering, but put a heavier load on your servo. The consensus so far, is the nut should be 4 to 5mm above the chassis.

 

[olds97_lss]

And you have to put threadlock on the nut or it will walk down the post and you lose steering.

 

[GabeRealD]

Is there supposed to be some up and down play where the spring and nut adjustment are. Or should I tighten up the nut?

Same issue for me. Is the up and down play coming from the spring being too loose?