Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!

Register Today It's free! This box will disappear once registered!

Servo Upgrade

Discussion in 'Electronics' started by jryanfallon, Nov 16, 2015.

  1. jryanfallon

    jryanfallon Well-Known Member

    Joined:
    Oct 19, 2015
    Messages:
    33
    Likes Received:
    12
    Arrma RC's:
    Fury
  2. ajdragon

    ajdragon Well-Known Member

    Joined:
    Oct 14, 2015
    Messages:
    572
    Likes Received:
    257
    Arrma RC's:
    Raider
    Hi

    It all depends on what chassis you have, the short chassis or the longer chassis. That servo is 4mm taller then the stock one.
     
  3. Unusual RC

    Unusual RC Moderator
    Staff Member Premium Member

    Joined:
    May 18, 2015
    Messages:
    811
    Likes Received:
    300
    Location:
    The Hague, The Netherlands, Europe
    Arrma RC's:
    Fury, Mojave
    I have this one in my Arrma Fury/Mojave: http://www.savoxusa.com/Savox_SW0230MG_HV_Waterproof_Digital_Servo_p/savsw0230mg.htm

    Fits perfectly, but needs the BLX esc. to power it, or any other esc. with a BEC system of 6,0V and 2,0A!

    I just converted the Fury to power this servo directly from the 2S lipo battery: a so called high voltage set-up. Because the esc. I use only can provide 1,0A max, which is not enough.

    Mind you this servo can handle 7.4V. And you cannot run 3S anymore.
     
  • Welcome to Arrma Forum

    Arrma Forum is a Arrma RC fan site that was started to give Arrma RC enthusiasts a place to come together and discuss and share their experiences with the entire Arrma-RC product line, such as the Arrma Kraton, Arrma Talion, and Arrma Granite.

    We welcome all Arrma RC enthusiasts, both new and old, racers and bashers that share a common goal - a willingness to help and learn.
  • Disclaimer