Servo upgrade

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

MadHatter

Member
Messages
30
Reaction score
7
Arrma RC's
  1. BigRock 4x4
So I think my servo might have broke, it turns really good to the right but the range of motion to the left is about half of the other side. I wanted to upgrade it anyways so no big loss. I am thinking about the Ecoboost JX servo CLS6322HV. Any thoughts or experience with it? Will the stock BLX 3s ESC provide 7.4v to it? Thanks guys, appreciate any input. BTW, here’s my truck after the wing install. Looks pretty badass!

9D4EBA78-499A-43EA-98F3-67914DEA4A59.jpeg
 
Make sure you get a 25t servo saver, the BEC can only supply 6v I believe.
 
Make sure you get a 25t servo saver, the BEC can only supply 6v I believe.
Ok so that servo does list 7.4v and 6 as well so that is good to know. I almost forgot about the 25t saver though. Thank you for that!
Ok so that servo does list 7.4v and 6 as well so that is good to know. I almost forgot about the 25t saver though. Thank you for that!
the servo actually says 7.4v or 6.6v so that might not work then.
 
Last edited:
Either the Kimbrough 124 or the Kimbrough 123 will work. The 123 doesn't require any modification, but it is a bit weaker than the 124. I have the 123 in my Typhon 3s: I have had no problems with it not being strong enough, even with heavy Pro-Line Trencher HP belted tires I had on the Typhon for a while.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top