Typhon Shock tower options??

[Mestizo_rc]

are all 6s towers interchangeable? was looking into Talion Towers but need some clarification as not buy it if it don't work. appreciate the help

 

[Garcbomber]

Yes, bulkhead mounting is universal

 

[Dan B.]

They will change the geometry, take different length shocks, etc. but yes, they’ll bolt up like @Garcbomber said. What are you trying to accomplish?

 

[Big Kid]

Yup, they ( Shock Towers ) cross fit onto Diff housings/bulkheads ... But shock length, a-arms used, potential of articulation & limits are all subject to change by altering the fitted pieces of the suspension systems within the 6S family

 

[palmryde]

If you are replacing on a stock Typhon, stay with stock parts for thar car. If you are modifying then that is all up to you

 

[Mestizo_rc]

They will change the geometry, take different length shocks, etc. but yes, they’ll bolt up like @Garcbomber said. What are you trying to accomplish?

would like to have the body mounts but have a lower tower height to fit various bodies. I understand that it will change the geometry of the suspension. I it ok to have a slight angle to the axle shafts? I get the straighter the better but for bashing?

 

[Big Kid]

would like to have the body mounts but have a lower tower height to fit various bodies. I understand that it will change the geometry of the suspension. I it ok to have a slight angle to the axle shafts? I get the straighter the better but for bashing?

Straighter .. as in:
Camber

Ideally while vehicle rests under it's own weight on tires, said tire is flat to surface or very close too Inside to outside ( Camber )

 

[slick2500]

would like to have the body mounts but have a lower tower height to fit various bodies. I understand that it will change the geometry of the suspension. I it ok to have a slight angle to the axle shafts? I get the straighter the better but for bashing?

If you wanted to keep the stock suspension geometry you could always line up the stock shock tower with the Talion one and drill the stock shock mounting points into the Talion tower. I think this should be possible.