Typhon So frustrated trying to mount Senton body mounts on my Typhon v4.

[WaxnDabs]

Hey everyone I hope you guys are safe and sound. I ordered some Senton 6s body mounts and posts but I can't seem to get the Typhons shock towers all the way through. I don't have any other screws the size or nuts to tighten the other end. What other ideas can you guys give me to mount them? Here's some pictures so you guys can see what I'm dealing with. Thanks in advance.

https://imgur.com/a/RqDtblP

 

[Overpowerrc]

Just going to need an m3x30 or 35mm to fix this. (The stock length should be m3x28) so measure and see which you need

 

[WaxnDabs]

Just going to need an m3x30 or 35mm to fix this. (The stock length should be m3x28) so measure and see which you need

Thanks I had no idea what screw size to use. Appreciate it?

 

[jondilly1974]

 

[WaxnDabs]

I ended up using some Hobao mounts I ordered I added some screws off a PowerHobby Fan Mount, and used 2 of the Typhons wing mount screws. It came out nice. I already lowered it a bit and I'm working on the body right now. Thanks for the help!

Typhon v4 6s

https://imgur.com/a/IeOy1mK

 

[MFM]

What body is that?

 

[jondilly1974]

I ended up using some Hobao mounts I ordered I added some screws off a PowerHobby Fan Mount, and used 2 of the Typhons wing mount screws. It came out nice. I already lowered it a bit and I'm working on the body right now. Thanks for the help!

Typhon v4 6s

https://imgur.com/a/IeOy1mK

You can get your body height set better once you trim out the wheels.

 

[WaxnDabs]

You can get your body height set better once you trim out the wheels.

Thanks I'll make sure to do that today I'll share the progress!

 

[WaxnDabs]

What body is that?

Hey it's a Subaru WRX shell