Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
First i would try to remove the servo saver (there's a hole in the bottom of the chassis to access the screw), because it might be that the servo saver (which acts also as the servo horn) was moved and your steering is shifted. try steering without it and see if the servo moves/sounds ok. then attach it back while centered and see if it fixes it.
If the servo is caput, any servo with a 25t spline will do fine. is use JX 6221MG in mine and it's doing exceptionally well. When you install note that the new servo will use 3-wire connector (vs the stock that uses 5-wire), so you'll need to plug it to a different port on the ESC, there's a 3-wire port there as well as 5.
Yes those are great cheap servos , I use that one In my outcast.Okay, so I removed the servo saver. I think it’s broken based on the sounds it makes as well as how it acts while turning left and right.
Will this servo work?
25KG Digital Servo High Torque Full Metal Gear Waterproof with 2 25T Adjustable Metal Servo for RC Model DIY 1/8 1/10 Scale RC Cars (Control Angle 180°) https://www.amazon.com/dp/B0882W5P22/ref=cm_sw_r_cp_api_i_th5AFbSFWQB3D
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!