FELONY2800
Fairly New Member
- Messages
- 48
- Reaction score
- 31
My 2050kv wire broke and I couldn't find a replacement. Is it good to just upgrade to the 3150kv?
Felony spektrum firma 2050kv or 3150Kv
- Thread starter FELONY2800
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
FELONY2800
Fairly New Member
- Messages
- 48
- Reaction score
- 31
- Thread starter
- #3
I was thinking the same thing but I guess I also was looking for a reason to upgrade lmao
FELONY2800
Fairly New Member
- Messages
- 48
- Reaction score
- 31
- Thread starter
- #5
Lmao that is true , so what you do in this situationYou don't need a reason for that, just the desire.
- Messages
- 1,688
- Reaction score
- 2,748
- Location
- Chi
- Arrma RC's
- 4x4-Mega
- BigRock 4x4
- Felony
- Fireteam
- Granite
- Infraction
- Limitless
- Kraton 8S
- Kraton 6s
- Mojave EXB
- Notorious
- Outcast 4s
- Outcast 6s
- Outcast 8s
- Senton 6s
- Senton 3s
- Senton Mega
- Talion
- Typhon 3s
- Typhon 6s
- Vendetta
- Vorteks
- Infraction 4x4
Ok get a new one. I'll take it. For free of course! 
- Messages
- 434
- Reaction score
- 984
- Location
- Charlotte NC
- Arrma RC's
- 4x4-Mega
- Infraction
- Kraton 8S
- Kraton 6s
- Kraton EXB
- Mojave
- Mojave EXB
- Notorious
- Outcast 6s
- Senton 3s
- Talion
- Typhon 6s
- Typhon 3s
Why wouldn't you just solder back together.. had one unsolder yesterday and had it fixed in 2min.
And why are you even considering such a high kv motor? That's a 3s Motor.
And why are you even considering such a high kv motor? That's a 3s Motor.
FELONY2800
Fairly New Member
- Messages
- 48
- Reaction score
- 31
- Thread starter
- #9
Just looking at options but I'm going to solder it back together
- Messages
- 434
- Reaction score
- 984
- Location
- Charlotte NC
- Arrma RC's
- 4x4-Mega
- Infraction
- Kraton 8S
- Kraton 6s
- Kraton EXB
- Mojave
- Mojave EXB
- Notorious
- Outcast 6s
- Senton 3s
- Talion
- Typhon 6s
- Typhon 3s
Definitely
Edough13
Bashing, Speed running and family!!
Premium Member
Excellence Award
Hospitality Award
Build Thread Contributor
- Messages
- 10,269
- Reaction score
- 13,273
- Location
- Northern California, USA
- Arrma RC's
- BigRock 4x4
- Granite
- Limitless
- Kraton 6s
- Mojave
- Notorious
- Typhon 6s
- Vorteks
Definitely do NOT go with the 3s 3150kv motor go with something right around 1800-2200kv. And as said above will take all of 30 seconds to resolder the bullet to the motor wire
Definitely do NOT go with the 3s 3150kv motor go with something right around 1800-2200kv. And as said above will take all of 30 seconds to resolder the bullet to the motor wire
Would a lower KV motor (like 1800) geared to match the same drive ratio as a 2050kv motor run cooler?
jkflow
TB RC Bashers
Lifetime Premium!
Premium Member
Excellence Award
Hospitality Award
Build Thread Contributor
In theory 'yes' but probably negligible. You should probably be in the 1600kV region to notice a difference.
No, do NOT go to 3150kV, it will last maybe 5 minutes before it dies a horrible death induced by heat. You might squeeze a couple runs out of it.
I de-soldered and re-soldered a couple of times until I switched them out to 6mm bullets on the motor/ESC connection. Definitely a weak point if you drive it like you stole it.
No, do NOT go to 3150kV, it will last maybe 5 minutes before it dies a horrible death induced by heat. You might squeeze a couple runs out of it.
I de-soldered and re-soldered a couple of times until I switched them out to 6mm bullets on the motor/ESC connection. Definitely a weak point if you drive it like you stole it.
