Typhon Steering help asap

Rcfun2

Well-Known Member
Messages
81
Reaction score
95
Arrma RC's
  1. Senton 6s
  2. Typhon 6s
OK guys my son's steering doesn't return to center. I have calibrated, I've installed a new servo I've made adjustments. When we turn right it won't go back to center. When we turn left it goes to center. I'm losing my mind trying to figure this out please help.
 

Smilinbri

RC is a hobby. Arrma is a lifestyle.
Lifetime Premium!
Premium Member
ArrmaForum Fan
Build Thread Contributor
Messages
4,892
Reaction score
10,594
Location
MD
Arrma RC's
  1. Felony
  2. Notorious
  3. Senton 3s
  4. Typhon 6s
  5. Vorteks
  6. Infraction 4x4
Check your pillow balls. If they are too tight it will struggle to turn. You don't want them tight. They should be slightly loose to allow for movement.
I had this exact issue on my very 1st Arrma and this is what solved it.
 

Rcfun2

Well-Known Member
Messages
81
Reaction score
95
Arrma RC's
  1. Senton 6s
  2. Typhon 6s
Check your pillow balls. If they are too tight it will struggle to turn. You don't want them tight. They should be slightly loose to allow for movement.
I had this exact issue on my very 1st Arrma and this is what solved it.
I will check this again it's definitely possible I screwed something up... just getting a little frustrated specially after ordering and installing a new servo.
 

Smilinbri

RC is a hobby. Arrma is a lifestyle.
Lifetime Premium!
Premium Member
ArrmaForum Fan
Build Thread Contributor
Messages
4,892
Reaction score
10,594
Location
MD
Arrma RC's
  1. Felony
  2. Notorious
  3. Senton 3s
  4. Typhon 6s
  5. Vorteks
  6. Infraction 4x4
I will check this again it's definitely possible I screwed something up... just getting a little frustrated specially after ordering and installing a new servo.
I know what you mean. I was so frustrated when mine was doing that. Just pop a hex in the red hub nuts and make sure they are not too tight. There should be some play in it. Good luck!! 👍 😁 ✌️
 
Top