Kraton Steering locked up

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Ole Fart51

Active Member
Messages
421
Reaction score
371
Location
Louisiana
Arrma RC's
  1. Nero
  2. Talion
this is the first problem with my new Kraton after 16 packs. Steering not turning left, nothing in a bind, turns easy by hand, thinking servo went out. What servo is a good replacement?
 
I am using this one, tons of torque, big improvement over the stock one. Savox makes a great servo. http://www.ebay.com/itm/Savox-SA-12...066349?hash=item2357a1a3ad:g:2asAAOSw4s9XkVQI

I definitely recommend getting an aluminum servo mount to put the extra torque to better use. Check it out: https://arrmaforum.com/threads/kraton-servo-mount-upgrade.17/


The servo I am using is a bit taller than stock. I accommodated for this by putting an extra nut under the steering arm ball to raise it about 3mm.
 
Last edited:
I am using this one, tons of torque, big improvement over the stock one. Savox makes a great servo. http://www.ebay.com/itm/Savox-SA-12...066349?hash=item2357a1a3ad:g:2asAAOSw4s9XkVQI

I definitely recommend getting an aluminum servo mount to put the extra torque to better use. Check it out: https://arrmaforum.com/threads/kraton-servo-mount-upgrade.17/


The servo I am using is a bit taller than stock. I accommodated for this by putting an extra nut under the steering arm ball to raise it about 3mm.[/QUOTE

Sorry guys, but, turns out I had a senior moment. Starting diagnosing my steering problem this morning. I don't have a break or a steering problem at all. Somehow I had the steering trim on the transmitter all the way to the right.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top