Notorious Steering Post bearing upgrade

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
IIRC, I got my steering post bearings from Jim's Bearings. I found them while doing a web search: it's been a long time since I bought them, and I no longer have the info.
 
Hello all, I'm about to completely redo my Noto steering system. I came across a place that sells a bearing replacement for the steering post but now have can't find it. Is this a worthwhile upgrade at least to remove slop? Also, where can I find these bearings? Thanks

https://www.amazon.com/Arrma-AR340062-Steering-Screw-3x14mm/dp/B00NE0HCM2
Here is how I figure out questions like that. I go to Arrma’s main website. Arrma-rc.com
Then I go to the car in question, open up the exploded view under manuals and support Quick link, find the part I need (in this case bushings I want to replace with bearings), so I look for the bushings, copy the part number down and then cross reference on the Horizon website.

I see that they are 6x10x3 bushings. Then I go to Jim’s bearings (or Fast Eddie’s, TBR etc) and search for the right ones. TaDaaa! Sounds involved, but it takes less then a couple of minutes. Below is also the link to the exploded view for the Noto. They have them for all cars. I take it a step further and even put bearings on the acumen bar. At the bottom is the link to that thread.
https://jimsbearings.com/products/6x10x3-individual?_pos=1&_sid=19fa59d39&_ss=r

https://www.arrmaforum.com/threads/bearings-for-the-6s-ackerman-bar.52621/

https://www.arrma-rc.com/on/demandw...-ackerman-bar.52621/ 611V5-Exploded_View.pdf

1562F93D-6ED1-4C0D-BC86-C97452B89B88.png


356E68BA-0F0D-4078-B664-0C154B00DAAE.png


04C54E7C-9573-4BDB-B8B9-4D4156405FD7.png
 
Last edited:
IIRC, I got my steering post bearings from Jim's Bearings. I found them while doing a web search: it's been a long time since I bought them, and I no longer have the info.
Here is how I figure out questions like that. I go to Arrma’s main website. Arrma-rc.com
Then I go to the car in question, open up the exploded view under manuals and support Quick link, find the part I need (in this case bushings I want to replace with bearings), so I look for the bushings, copy the part number down and then cross reference on the Horizon website.

I see that they are 6x10x3 bushings. Then I go to Jim’s bearings (or Fast Eddie’s, TBR etc) and search for the right ones. TaDaaa! Sounds involved, but it takes less then a couple of minutes. Below is also the link to the exploded view for the Noto. They have them for all cars. I take it a step further and even put bearings on the acumen bar. At the bottom is the link to that thread.
https://jimsbearings.com/products/6x10x3-individual?_pos=1&_sid=19fa59d39&_ss=r

https://www.arrmaforum.com/threads/bearings-for-the-6s-ackerman-bar.52621/

https://www.arrma-rc.com/on/demandware.static/-/Sites-horizon-master/default/dw6f4b5397/Manuals/ARA8 Thread 'Bearings for the 6s Ackerman bar' https://www.arrmaforum.com/threads/bearings-for-the-6s-ackerman-bar.52621/ 611V5-Exploded_View.pdf

View attachment 270987

View attachment 270988

View attachment 270989
It's actually not the bell crank bushing you listed but the ackerman bushing. Coincidentally, one of the links you listed has it. Thanks, I didn't know you could lookup bearings like that.
 
Last edited:
It's actually not the bell crank bushing you listed but the ackerman bushing. Coincidentally, one of the links you listed has it. Thanks, I didn't know you could lookup bearings like that.
Good grief you’re right. I must’ve had the the Ackerman bar on my mind… I do stuff like that. Sorry man, glad you figured it out.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top