Typhon Steering servo upgrade question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Typhon2016

Active Member
Messages
106
Reaction score
51
Anyone try the savox 1231 in their typhon? Seems a bit tall compared to stock.
I found a great deal on Amazon is why I'm asking

Savox 1231
Torque @ 4.8v - 28.0kg/388.8oz-in
Torque @ 6v - 32.0kg/444.4oz-in
Speed @ 4.8v - 0.18 sec/60 deg
Speed @ 6v - 0.14 sec/60 deg
Dimensions L x W x H : 40.3 x 20.2 x 44.9
Weight: 79.0g

Arrma servo
Dimensions L x W x H : 40 x 20 x 38mm
 
If you get a servo mount like emp or something they are made higher to accommodate a larger servo. A servo upgrade is always a nice step up. Just make sure it's supported nicely and has the volts it needs so you can use it's extra torque.
 
I'm still using the stock servo, but with the Voltage Hobbies mount. Thinking about upgrading the servo soon. Not sure to what yet.
 
I was just looking at those Eco servos. They have some nice specs. Whenever my stock one goes out I'll upgrade. So far, it's still going strong.
 
I run the spektrum s6230 it's low profile so i can mount it underneath the bracket. Keeps the linkage straight and at 6 volts has 333oz!!!

20180611_230948.jpg
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top