This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
justpassedu
Active Member
It will work although i don't know what size servo horn it will use .
Few silly questions (that I have screwed up before)
1 - is the servo plugged into channel #1?
2 - Is the servo plug reversed? If it has brown/orange/yellow wires, make sure the yellow is on the Signal side (white) and the brown in on the (-) (black) side.
3 - Remove servo horn, and make sure the servo is not locked to one side? (this is kind of easy to see, though)
4 - did any of the servo wires back out of the plug when you plugged it in?
like I said, simple stuff, but sometimes easy to overlook...
Jerry
1 - is the servo plugged into channel #1?
2 - Is the servo plug reversed? If it has brown/orange/yellow wires, make sure the yellow is on the Signal side (white) and the brown in on the (-) (black) side.
3 - Remove servo horn, and make sure the servo is not locked to one side? (this is kind of easy to see, though)
4 - did any of the servo wires back out of the plug when you plugged it in?
like I said, simple stuff, but sometimes easy to overlook...
Jerry
- Thread starter
- #25
Ok I solved the problem . I plugged servo reverse so right know it's work but I have different problem I was playing with remote tactic because tray to fix problem with servo and do something so right now my diff brain doesn't work
