Typhon Steering sucks.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Virginia mud

Active Member
Messages
136
Reaction score
101
Ok here is the problem. With the servo off the steering linkage works perfect. Installed a new ecopower servo 6 volt 110t. I go to set my steering end points and nothing. The servo works but it won't reach left or right very far.the servo horn is set center as per directed, it's binding some where I can't find any binding I used a fresh battery still can't get it. What is happening? Please help.
 
Steering is for noobs.
Ok here is the problem. With the servo off the steering linkage works perfect. Installed a new ecopower servo 6 volt 110t. I go to set my steering end points and nothing. The servo works but it won't reach left or right very far.the servo horn is set center as per directed, it's binding some where I can't find any binding I used a fresh battery still can't get it. What is happening? Please help.
Just kidding, I have no idea. Maybe the servo saver is binding on the linkage comming off of the servo saver??
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top