Typhon Stretched typhon street bash

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Rcproponent

RCP
Premium Member
ArrmaForum Fan
Excellence Award
Build Thread Contributor
Messages
6,387
Reaction score
12,576
Arrma RC's
  1. Nero
Finally finished this thing… it’s been sitting on the bench getting finished in micro pieces and it’s finally done…

MM2 esc
TP 4050 2100kv
Infraction towers
Infraction shocks
Talion body
Typhon length arms
Typhon gears
50t spur 22t pinion


Shoutout to @BashingBrian and @Infraction666 for inspiration..

Starts:
0D601386-6C96-4DF2-ADCA-FE4CF4025B68.jpeg


First I started with talion towers and typhon shocks… that didn’t work..
F7376E0E-CB50-45C6-8527-B70E0521E6A3.jpeg
1BCE8C39-F3B9-4A56-9CBD-461BDB90D7E8.jpeg
20BD21E7-D18F-40CA-B017-06B9C17A83BF.jpeg
C22E83E3-6462-4ECF-9536-0480F2DDEDA4.jpeg

so I switched to infraction towers and shocks ..
2C127014-5D9F-4441-88FA-51ADA59F456D.jpeg
getting closer
8BEB4B8C-80AD-473C-A895-ECBABC89CCAD.jpeg
done..
8EF9BA1E-7B97-476A-B893-5E8F29F42876.jpeg
 
You need to limit the travel on the shocks with some nitro tubing. Also adjust camber so the wheels are totally flat on the ground. I skipped that once because I just wanted to go driving and adjust more later. The Hoons did not like it. Also think about using harder springs on the shocks to help limit movement and keep the Hoons level on the ground.
 
You need to limit the travel on the shocks with some nitro tubing. Also adjust camber so the wheels are totally flat on the ground. I skipped that once because I just wanted to go driving and adjust more later. The Hoons did not like it. Also think about using harder springs on the shocks to help limit movement and keep the Hoons level on the ground.
For sure, I have a hudy alignment and camber tool, I will be sure to get her dialed in. Also, something notable is this will just be a hooning around car.. parking lot bashing and what not.. Nothing that will be going super fast down the road or anything.
 
Same here, no speed runs. Was only hooning and didn't even bother to adjust the droop scews. Really took some tire lifetime with one battery run. Took the hoons off then. But thanks to your post - I think I need them back on.
 
Same here, no speed runs. Was only hooning and didn't even bother to adjust the droop scews. Really took some tire lifetime with one battery run. Took the hoons off then. But thanks to your post - I think I need them back on.
Gotchya, tire life thing totally get it 👌🏻 Will dial it in good :)
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top