Notorious T bone bumper issue

[Dakota]

I have the new t bone bumper .. do I have to buy that little talion bumper or whatever so the hinge pins don’t fall out ??

 

[Lazy Bushman]

Nope. Which bumper did you get?

 

[Dakota]

Tbr v2

 

[Primarrma]

Doesn't look like you need anything extra.

 

[Dakota]

Doesn't look like you need anything extra.

How the heck do you put it on then and keep the regular bumper on cause if I take it off the t bone won’t hold pins in

 

[Lazy Bushman]

The standard bumper is removed. The pic of my car attached isn’t of the V4 but the mounting block is. You will have the rubber block and behind it the red plate then you diff housing. You then mount the bumper both underneath the plate and then into the rubber mounting block. You will have 2 longer screws that go through the rubber block and red plate and into your diff

 

[Dakota]

Mine didn’t come with the block
That’s the same one I bought and it looks like they keep the stock bumper on

 

[Lazy Bushman]

Wow I wonder if they did that for the Kraton. My apologies for causing any confusion. I thought they were the same

 

[BashingBrian]

I have a Kraton with the "10007 TBR Typhon basher bumper" and it requires the small Typhon bumper to hold hinge pins in place..??

 

[Primarrma]

Doesn't look like you need anything extra.

On the talion and Kraton I have installed the mini bumper, but on that product page it doesn't mention you needed that, maybe it's from before arrma changed the bumper design. This is another reason I only run the Typhon bumpers now on all my cars. You still need the small arrma bumper, but that is it.

 

[Lazy Bushman]

The one I have now on my Kraton is for the Typhon but the smaller one

 

[Primarrma]

The one I have now on my Kraton is for the Typhon but the smaller one

There is a wider one, I only realised that today when I had my Talion and Typhon next to each other, they are both great, but the one with the round holes is definitely wider, I run that on the Talion. https://tboneracing.net/collections/typhon/products/10007-tbr-1-8-basher-front-arrma-typhon-6s

 

[Lazy Bushman]

I run this one at present

https://tboneracing.net/collections/typhon/products/10054-tbr-bastion-front-bumper-arrma-typhon-6s

 

[uncels]

I ordered the 10047 TBR VX4 This one & don't think it's delivered complete. On the link it says i should have some extra's. I received this, see photo. Anyone knows what's missing?

 

[Dakota]

On the talion and Kraton I have installed the mini bumper, but on that product page it doesn't mention you needed that, maybe it's from before arrma changed the bumper design. This is another reason I only run the Typhon bumpers now on all my cars. You still need the small arrma bumper, but that is it.

You think I’m still going to need the smaller one ??

 

[Dakota]

I tried to do the bumper again today I definitely need the smaller bumper to apply it .. guess I’ll have to order it
I believe this is is the right bumper this is the one I used on my kraton with the rpm bumper

 

[Primarrma]

I tried to do the bumper again today I definitely need the smaller bumper to apply it .. guess I’ll have to order it
I believe this is is the right bumper this is the one I used on my kraton with the rpm bumper

It's a handy pack of spares to have anyway. They should have mentioned that on the website, I'm sure that rpm does at least say what you need?

 

[Dakota]

It's a handy pack of spares to have anyway. They should have mentioned that on the website, I'm sure that rpm does at least say what you need?

Nope they don’t even tell you that you need the smaller bumper .. I already have all the spares from the first one lmao o well .. And it sucks they won’t sell just the bumper it’s like you get one get nug and the rest is swag lol

 

[Lazy Bushman]

I ordered the 10047 TBR VX4 This one & don't think it's delivered complete. I mailed the shop, but i can't seem to find a photo what should be in the bag. On the link it says i should have some extra's. I received this, see photo. Anyone knows what's missing? I can't put it on the car like this.

I haven't put a bumper on my 3s so I'm not sure what is missing. I'd need to have a look underneath tonight when I get home from work to check the hole alignment.

 

[Jimbobjr]

If you are running tbone in the oc/noto than you keep the pin retaining part of the bumper under the new tbone. Works great.