Talion Talion 6S v4 need bigger radio box (SR6100AT receiver)

[DoggJON]

Hi,

I bought the Spektrum DX5 Pro and the receiver SR6100AT for my Talion 6S v4.

The problem I'm facing is the stock radio box (AR320422) is a bit too small for this receiver.

Is there any other radio box that could fit this receiver and my RC pretty easily? What are my options?

I would prefer not the cut the radio box to keep the waterproof feature (last case solution)

Any helps would be really appreciated!!

Thanks!

 

[jkflow]

It fits just fine with minimal effort.
https://www.arrmaforum.com/threads/spectrum-receiver.21568/

You need to upgrade your servo to a digital one if you want to use AVC.
Any Spektrum compatible surface receiver will work. I'm using the SR315 but 215 will work as well.

 

[DoggJON]

It fits just fine with minimal effort.
https://www.arrmaforum.com/threads/spectrum-receiver.21568/

You need to upgrade your servo to a digital one if you want to use AVC.
Any Spektrum compatible surface receiver will work. I'm using the SR315 but 215 will work as well.

Thanks for your link! I will try this out for sure.
The result I was expecting!

 

[DoggJON]

@jkflow you are right!! The receiver fit without the antenna. It's thigh but fit when you push!

I am just scare to bend my antenna in the receiver to make a new exit on the side since it seems too close of the connector

Was your hole on the side of receiver like my picture or you took another path?

Txs!

 

[jkflow]

You rotate that entire connector. It spins freely.
I turned it opposite to what you show. I drilled a small hole in the receiver box. That way you can route it to the small antenna stub thingy.

 

[DoggJON]

WOW! A new EXtreme Basher (EXB) radio box just appears for my Talion in pre-order coming out this july.

Dimension seems to fit now!! I will wait for this. If I still have problem, I will use your solution!


#AR320604
Maximum Internal Dimensions (L x W x H): 52mm x 36mm x 33mm
https://www.arrma-rc.com/part/ARA320604/TALION/ALL/ALL/ALL#xref

-> Pre-Order from Horizonhobby for July 2020
https://www.horizonhobby.com/product/radio-box-set/ARA320604.html

SR6100AT 6 Channel AVC/Telemetry Surface Receiver
Dimensions (L x W x H): 42.4mm x 23.9mm x 15.1mm
https://www.spektrumrc.com/Products/Default.aspx?ProdID=SPMSR6100AT


I should go buy lottery tickets!! ?

Txs for your helps!

 

[VonJarga]

Do you have the dimensions of the AR320422 6s radio box? I am trying to figure out how much bigger it is than my AR320400 4s radio box.