Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
And thank you for the rc porn content! Those parts are amazing to look at!Thanks so much for the kind words.
I buy the kydex from eBay. It comes in several thicknesses but for the bumper above I use 1/8”. I made a cardboard cut out similar to a broken typhon t bone bumper. Cut it out, drilled and counter sunk the holes, mounted it, marked it where I wanted it bent, removed it and heated with a heat gun and bent it. I make them a little longer than the t bone so I can bend it up further. I did not break any yet. Here’s the one on my trugified typhon from that thread. The talion one I made it wider and bent the ends in to follow the body.@Jimbobjr ... did I miss the Kydex bumper..?? do you have any specs, size thickness etc..?? ??
I would be partial to making some as I think both the T-bone and RPM bumpers are both flawed designs in their own ways..?
Good to know yours is still running strong..!!Just an update on this build. It’s still running awesome after nearly two years. All my home made aluminum and carbon parts are fine. Broke the usual stuff everywhere else. I’ve yet to break a kydex bumper. I’m running several on other rigs.
If you’re waiting for a exb talion maybe just build your own.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!