SOLD / FOUND Talion exb (local pick up socal)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Status
Not open for further replies.

Niz55

Very Active Member
Messages
1,248
Reaction score
1,546
Just bought this last week from my local hobby store. I have ran this car for about 5 min in front of my parking lot and half in the park jumping. I am just not into this type of trucks. Wheelies way too easy. It was flipped twice in the parking lot and the body is scraped little bit on top. Esc has the smart wires removed and also the second connector to use 2x batteries has been removed for cleaner look. Other than that is basically new.

Rpm rear skid plate
Power hobby high speed fans for motor and esc

Local pick up only in southern California

$500

PXL_20220426_233701213.jpg

PXL_20220426_233705963.MP.jpg

PXL_20220426_233709610.jpg

PXL_20220426_233713073.jpg

PXL_20220426_233744513.jpg
PXL_20220426_233753721.jpg

PXL_20220426_234617707.jpg
 
Last edited:
Wow. That's a deal. Wish I was closer.
 
Last edited:
Not for sale anymore. I am keeping it. Bought tons of parts for it. Lol
Nice, wheelies are a good thing anyway. You can never have too much power just too little, its called throttle control! lol
 
Local pick up. Price is $650

Back up for sale. I did buy tons of parts for it. Problem is I have all 1/5 scale cars and run them in the park. This little car loves to wheelie alot specially on the grass and I am not into it at all. I did however run it once on dirt and drives excellent but I do not run my cars at all on dirt.

Whoever buys this car is getting hell of a deal. Extremely low usage. Everything was bought brand new. Still going to be local pick up so the buyer and drive it before purchasing.


PROBLEMS WITH THE CAR:

Pretty sure this is a common issue . Landed couple of times wrong and the front shaft popped out of the cup. Did some research about this and seems to be an issue on this car and kratons. Fixed it with adding rubber washer on the shock shaft so it doesn't compress beyond is needed and never happened again.

Top body is scraped from sliding on asphalt ( see lic)(Will cover up with arrma sticker)

Mods:
Castle MMX8S with 1650/1520 combo
ESC aluminum high speed fan
Front and rear aluminum HR bulk heads
Front and rear Aluminum Gearbox Case Bulkhead Cover
Front and rear HR aluminum hubs
Front and rear HR Aluminum Center Sway Bar Mounts
HR Aluminum Rear Brace Mount
Arrma Aluminium Wing Posts (red)
Arrma 3x5.8x10.8mm end link ball ends
ShareGoo Metal Center Differential Cover Mount
ShareGoo Aluminum Center Differential Mount
ARRMA Shock Springs, 85mm 1.21N/mm (6.91lbf/in) for rear
Outcast 4S backflips all around
RPM rear skid plate
Tekno RC Aluminum wheel nut
Cnhl 6S 5200mah

DOES NOT COME WITH RECIEVER AND TRANSMITTER OR STOCK WHEELS/TIRES.

Other stock parts included.



PXL_20220515_193006720.MP.jpg

PXL_20220515_193031747.jpg

PXL_20220515_193103549.jpg

PXL_20220515_193024278.MP.jpg


BODY SCRAPED
PXL_20220515_193010450.MP.jpg


shaft popping out and scratching the cups.
PXL_20220515_193128949.MP.jpg

Also, esc wires are extended with 8gauge wires. Not sure why castle uses such a short wires.
 
Last edited:
I'd totally buy this if I was local, seems like a great deal.
 
I will meet you today anytime if they back out. I'm in San Diego county. Ramona to be exact. Cash in hand
 
Status
Not open for further replies.
Back
Top