I have a problem with the steering on my V3 Talion.
After crashing the right side into a tree. I had to replace several parts including the suspension holders and the diff case as well as upgrading to RPM A arms.
I found that the top plate that goes over the steering bellcranb was bent so I straightened it out as well as the steering link between the bellcrank posts which was also bent.
Upon putting everything back together the steering is off to the right. The turnbuckles are not bent and the servo saver posts look fine too. The trim hadn't been changed either and to make the steering straight it requires 80% trim to the left.
Can anyone help me fix this?
After crashing the right side into a tree. I had to replace several parts including the suspension holders and the diff case as well as upgrading to RPM A arms.
I found that the top plate that goes over the steering bellcranb was bent so I straightened it out as well as the steering link between the bellcrank posts which was also bent.
Upon putting everything back together the steering is off to the right. The turnbuckles are not bent and the servo saver posts look fine too. The trim hadn't been changed either and to make the steering straight it requires 80% trim to the left.
Can anyone help me fix this?