Team associated prosc4x4 to drag car conversion... with limited resources

[justorange rcs]

We had an explosion in our prosc4x4 and the parts available for this truck have become very limited... so we are doing what we can to convert it to a 2wd drag car! Some obvious issues are no tow adjustment in the rear suspension, traction, steering is loose, and we are using a stock prosc4x4 chassis esc motor and suspension set up
So... we ask tons of questions, lots of trial and error (and epoxy)
save money where we can, and keep trying
All for the love of the hobby

 

[justorange rcs]

Oh man!!!! Now we really have work to do

 

[slick2500]

Oops. That is not good.

 

[justorange rcs]

Well now... we are looking at salvaging what we can to build a no prep drag car.
here is what is left. Any suggestions on direction to build a drag car are appreciated.
(Not tossing in the garbage)

1 reedy brushless motor , new spur&pinion
Reedy ESC ,
Receiver and transmitter
25g servo with servo saver
Steering linkage etc.
Rear diff gears , output drives , axles ,a arms ,rear diff housing
4 wheel hubs with pro tec bearings
Rear Pro line Hoosier drag tires and rims
4 16mm shocks
Front and rear Shock towers and body mounts
1 prosc4x4 belly tray chassis thingy
A pile of bits like ball cups and washers, bushing, etc.

Not sure where to start really.