Outcast Thinking about getting Outcast 8s EXB

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

HZRDOS

Very Active Member
Build Thread Contributor
Messages
2,248
Reaction score
4,495
Arrma RC's
  1. Kraton 4s
  2. Outcast 4s
  3. Outcast EXB
  4. Talion EXB
So from what I have seen, looks like should go with:

Max5 1100kv, 30/39 gearing?

What motor fans and heat sink is a good choice?

Assume 46kg servo will work well? Is servo physical size same as 6s?
 
Motor and gearing sounds right.
I'd check how hot they get before adding fans.

Servo is not the regular 6S size, they are a lot bigger. 46kg sounds about right, stock is 38kg, make sure you get that value at the BEC voltage you will pick.
I'd probably go a littler higher in strength (50+) if the price is right. Really depends on your tire choices down the road.

I don't have one myself, but eyeballing one. I've seen them in action and not impressed to be honest, they break way to often, but yes they are fun.
 
Buy one ..!!! They're awesome..😉👍🏼😎

I'm still testing out gearing, but I've been advised that with the Outcast you're better off using the 47T rather than the 39T 🤔

I'm running 22/39 on the stock firma setup.. seems to be solid.. 40mm fan on esc.. twin 30's on the can for now.. twin 40's I should be able to step up to a 23 with no heat issues..
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top