jellegoertz05
Fairly New Member
- Messages
- 10
- Reaction score
- 3
Hello,
I was just driving normally with my arrma infraction v2. I was warming up the tires and suddenly the steering and throttle stopped working, the handbrake still works. I opened up the car and I saw that one battery connector had came loose. I always plug in my battery’s correctly and the car worked before that for like 10 minutes. And now after a day the steering and throttle still don’t work, but the handbrake is fine. When I turn the front wheels, the servo resets itself and the steering works for a second, so I don’t think the servo is dead and sometimes when I move the car, it resets it self and starts counting the cells and then I also have throttle for a second. Because of that I think that the servo and motor are fine. Also after the startup, the ECS doesn’t blink red or green and it doesn’t make a noise.
The car does the same with different battery’s
I was just driving normally with my arrma infraction v2. I was warming up the tires and suddenly the steering and throttle stopped working, the handbrake still works. I opened up the car and I saw that one battery connector had came loose. I always plug in my battery’s correctly and the car worked before that for like 10 minutes. And now after a day the steering and throttle still don’t work, but the handbrake is fine. When I turn the front wheels, the servo resets itself and the steering works for a second, so I don’t think the servo is dead and sometimes when I move the car, it resets it self and starts counting the cells and then I also have throttle for a second. Because of that I think that the servo and motor are fine. Also after the startup, the ECS doesn’t blink red or green and it doesn’t make a noise.
The car does the same with different battery’s