Limitless Tips on Front Lower Suspension Arm Disassembly

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

kaladeth

Very Active Member
Lifetime Premium!
Premium Member
Rig of the Month Winner
Build Thread Contributor RC Showcase: 3
Messages
969
Reaction score
2,554
Points
473
Location
Mountain View, CA
Arrma RC's
  1. BigRock 4x4
  2. Limitless
For maintenance or replacement of the front lower suspension arm, do you guys have any tips or tricks on how to remove (and then later reassemble) the little front bumper mount - lower and the front front suspension hanger? It’s a pain.

IMG_1528.jpeg


IMG_1529.jpeg
 
Ahh come on, the joy the hobby is taking things apart and putting back together. Running these rc's are fun but I enjoy working on them, that's what it's all about.
(Rechargeable screw driver is a must & some MIP hex drivers)
Don't look for the easy way look for the right way. Have fun.😀
 
For the rear, it helped to loosen the two other bulkhead screws. It would probably help for the front too but I haven’t tried it yet.

For the front, I found that if the hinge pins are still in good condition, you don’t need to remove the suspension hanger; you can just pull both hinge pins out to free both arms.

PS. Some pix of the chassis damage from the stock droop screws that I’m replacing.

IMG_1530.jpeg


IMG_1531.jpeg
 
Last edited:
Back
Top