Gdub34
Active Member
- Messages
- 682
- Reaction score
- 416
MIP 1.5, 2, 2.5 mm drivers
Craftsman ignition wrenches
Needle nose pliers
Dykes(hobby size cutting pliers)
zip-ties
Electrical tape
Superglue
Silicone spray lubricant
Stiff paint brush
Soft paint brush
Can keyboard air
Blue (242)loctite
Don’t use power anything. Use feel and your hand to guage and learn torque on these metal screws going into plastic as well as the metal going into metal. Quality over quantity imo good luck
Craftsman ignition wrenches
Needle nose pliers
Dykes(hobby size cutting pliers)
zip-ties
Electrical tape
Superglue
Silicone spray lubricant
Stiff paint brush
Soft paint brush
Can keyboard air
Blue (242)loctite
Don’t use power anything. Use feel and your hand to guage and learn torque on these metal screws going into plastic as well as the metal going into metal. Quality over quantity imo good luck
Last edited: