Typhon Tp power motor timing

[Qeez12]

Hi guys, I need a little help here. What is the best esc timing for a tp power 4070 2250kv Y motor? I ran my typhon regularly for practice and did 125 - 127 mph constantly with 10 degrees of timing. In order to gain more, I then increased the timing to 15 with the same setup, exactly the same application and the speed I got was actually lower ranging from 119-123 (full batt cells). The rpm drops on my data log. My very first Y motor and still learning. Hope someone in this forum is kind enough to share the perfect timing for this motor.

thanks for reading!

 

[The Donut Man]

I've heard that Y-winds prefer 5-15 degrees of timing and that D-winds need 0 timing. I'd say slowly increase the timing from 0 and stop as soon as you get hotter without gaining anymore speed.

 

[Qeez12]

Thank you buddy for replying. I’ll try 5 degree timing for my next run and see which goes better with my setup.