TpParts RcXtreme | ARRMA Siren 6s BLX v2 1/10th 4wd truck

[TpPartsRcXtreme]

Ok, so its time...to build a v2 of the iconic Siren 1/10th truck...wheelbase is the same as Granite 4x4 and Proline M4x4....this time a lot of Titanium,carbon and 7075-t6 will be involved stay tune...build starts this weekend.

Picture of the MOST iconic ARRMA ever build, Siren 6s BLX 1/10th 4wd truck - By TpParts RcXtreme

 

[TimePancake]

6s with granite wheel base? That'll be fun!

 

[Brandon]

Let’s go!!!!

 

[StephenSchandelmayer]

Going to be an absolute nut case lolol but it's going to be so much fun for sure. Instant backflips

 

[GRC]

YES! I love this build. If I could get my hands on a chassis, I'd love to have my own.

 

[TpPartsRcXtreme]

Today starts the work, will cut the chassi

 

[TpPartsRcXtreme]

 

[TimePancake]

That was quick! Have you cut the chassis already?

 

[TpPartsRcXtreme]

Yes sir

The build continues for the upc ARRMA Siren 6s v2 1/10th 4wd truck. Prev version, was based on a v1 Typhon, lower motormount, wich made it easy to make a topdeck..also i used a beefy turnbuckle with rodends as a front centrebrace..thats history..found a new EXB rear brace..some messure, cutting and threading its now in place. Topdeck cant be used due to the higher centre part, but we are on that to #custombuild #notboughtbutbuilt #rynos #thunderoos #customrcupgrades #barkarbyhobby #wfo #fms #tppartsrcxtreme #traxxas #arrma #xray #losi #sworkz

 

[TpPartsRcXtreme]

Used a rear exb brace, cut to angle, drilled and threaded M4....adjusted stock towers, waiting for titanium oarts and 7075 from crcu

 

[Pito]

Awesome! What shock towers do you use? And what dogbon?

 

[TpPartsRcXtreme]

This is just a mockup, il be using titanium towers for typhon, and Titanium cvds on all 4 corners incl centrahafts

 

[BashTillBroken]

I’ve been wondering how do you make you m2c chassis so shiny there reflective

 

[TpPartsRcXtreme]

No M2C as long ma eyes can see brother. Stock, cut, drilled...and using a spec 3M bruah on the drillmachine.

New final mockup..time to step down and wait for the parts..all should be here upc week

 

[BashTillBroken]

Another car that you could make is kratless a kraton 8s on a limitless chassis Would allow for longer chassis and have a wide wheel base would be awesome just an idea if you want to make one

 

[TpPartsRcXtreme]

Thx buddy for the idea. But my custom made ARRMA Kraton XL and XL v2 are longer then the mentioned one first one i made was long time before the bigger cars where on thoughts..sold it, made a new one a few month ago wich are a v2. ❤

 

[BashTillBroken]

still sounds fun especially if you can fit a lifted version of the limitless towers on it

 

[TpPartsRcXtreme]

All custom works are fun . Next ar will the Tsaagan 6s v2 1/12th 4wd truck..but thats next year ❤

 

[TpPartsRcXtreme]

 

[K-BASH]

Used a rear exb brace, cut to angle, drilled and threaded M4....adjusted stock towers, waiting for titanium oarts and 7075 from crcu

View attachment 176918

View attachment 176919

View attachment 176920

Are those custom legth center shafts or just the shortest ones off swb?? Need me a xxxL chassis for speedrunning,3 short center shafts,ive already tried it,not enough chassis thou