Typhon Typhon 3s, need to replace Steering Blocks AR330469 and some other parts

[RussR]

the hot racing part doesn't look right?
https://www.amazon.com/gp/product/B...CV3GB&linkId=36e8c41b9f7d958c108538acd1d8c2ac

VS the GPM part..

https://www.amazon.com/GPM-Granite-...+arrma&qid=1572003810&s=toys-and-games&sr=1-8

is it the right part?

anything else i should be looking at?

also need a set of front arms, are these the better set to go with?
RPM
https://www.amazon.com/gp/product/B..._title_dp_2?ie=UTF8&psc=1&smid=A1YLD6DK9B7ZV6



also, i want to widen it some, im looking at these
https://www.amazon.com/gp/product/B..._title_dp_3?ie=UTF8&psc=1&smid=A3R9HA3UFREGHR

they add 10mm, i wouldn't mind a bit more, any suggestions?

car is 90% used on dirt track racing...

 

[jondilly1974]

the hot racing part doesn't look right?
https://www.amazon.com/gp/product/B...CV3GB&linkId=36e8c41b9f7d958c108538acd1d8c2ac

VS the GPM part..

https://www.amazon.com/GPM-Granite-...+arrma&qid=1572003810&s=toys-and-games&sr=1-8

is it the right part?

anything else i should be looking at?

also need a set of front arms, are these the better set to go with?
RPM
https://www.amazon.com/gp/product/B..._title_dp_2?ie=UTF8&psc=1&smid=A1YLD6DK9B7ZV6



also, i want to widen it some, im looking at these
https://www.amazon.com/gp/product/B..._title_dp_3?ie=UTF8&psc=1&smid=A3R9HA3UFREGHR

they add 10mm, i wouldn't mind a bit more, any suggestions?

car is 90% used on dirt track racing...

I have those HR hubs on my Typhon as well as the RPM arms. I don’t use hex extenders in addition to the already wide Typhon arms because I don’t want mine any wider. If I did want a wider Typhon I would swap to the 4S RPM arms, and grab the Arrma 4S hubs and driveshafts. The bearings are larger too, so you’ll need the 4S sized bearings. The 4S hubs are much thicker and won’t need the aluminum parts there. Also the tie links are beefier too. You’ll need those.

 

[Mk_Rc]

how you know when to change steering knuckles...do you break yours? what issues is showing? i have problem in front, sagging wheels and when you move wheel it looks like they have a lot of space...on rear wheel is not that much space...and they don't move side by side that much...is that normal to they have so much space on front wheels?

 

[jondilly1974]

how you know when to change steering knuckles...do you break yours? what issues is showing? i have problem in front, sagging wheels and when you move wheel it looks like they have a lot of space...on rear wheel is not that much space...and they don't move side by side that much...is that normal to they have so much space on front wheels?

Mine broke when it used to be a Granite and I started jumping it with a small ramp. It was cold out and broke that c-block pretty quickly. Since then I’ve stretched it to a Typhon and replaced all the hubs and c-blocks to HR aluminums. My issue was the front wheels would tip out at the top. The bottom was still attached but the top snapped, letting it flop around.

 

[RussR]

how you know when to change steering knuckles...do you break yours? what issues is showing? i have problem in front, sagging wheels and when you move wheel it looks like they have a lot of space...on rear wheel is not that much space...and they don't move side by side that much...is that normal to they have so much space on front wheels?

broke...

 

[alelys]

?