Typhon Typhon battery tray too small.

[therealdonaldtrump]

So I I have a typhon 6s. I tried to put 2 3s spektrum batteries in my typhon and I could not put the body on without forcing it and ruining the body. Is this normal or am I doing something wrong? Do I have to get a large 6s battery just to so I can bash with the body on it?

 

[Edough13]

It's normal unfortunately. Have to run a single 6s pack and that's even tight. I raised the rear body mounts to fit dual packs so there's just one screw in the top on tower and bottom hole of post. Also can raise the front post with like a Kraton post cut flat and screw into bottom of it. I believe there's a thread on raising Typhon body mounts I did should be able to search and find it has some pics to help. Here's a video I did also that will help ya out.

 

[Engineer]

Yup. You won’t be able to get 2 3S hard packs in there. Some smaller capacity 3S soft packs might work.

 

[therealdonaldtrump]

Thanks guys for your help. I appreciate it!

 

[Yonic]

You need thinner 3s packs (25mm) and they will fit. i use SMC hardpack ones

 

[K-BASH]

I raised body on stretched typhon.it can fit up to 2×37mm packs.the longer rear mounts make it a little easier to raise rear.some washers on lower screw to raise rear some.

 

[chris adams]

I raised body on stretched typhon.it can fit up to 2×37mm packs.the longer rear mounts make it a little easier to raise rear.some washers on lower screw to raise rear some.

View attachment 146804

View attachment 146805

View attachment 146807

View attachment 146808

Hey bro dizzle, what battery tray did you have on this one

 

[K-BASH]

Hey bro dizzle, what battery tray did you have on this one

HR metal 1