Typhon Typhon hub extenders.

[ManhattanRC]

I like to experiment like most of you on my cars, and lately I've bought a few sets of axle extenders for the Typhon. I bought two sets albeit not brand name, and I'm having a little trouble aligning the Pin to fit through both the axle in the extender. I've had to drill at least two on both sets.

I'll go ahead and give them a few runs, but has anybody else ever had this problem? Anytime time I go to swap back the stock hexes everything is fine, but these aftermarket parts seem a little chintzy.

Is there a good brand name pair that I can purchase?

 

[Piecejointe]

AE works fine, with the stock pins and shims if you want to make it perfect, but most people run them without.
https://www.amainhobbies.com/team-associated-rc8t-wheel-hex-set-asc89330/p28097

They are available in various offsets too I think.

 

[Tomberland]

I ordered 2 x this part from Aliexpress:

https://nl.aliexpress.com/item/RC-A..._expid=45bd2d6b-415b-4538-9ce7-5b2cd3c2ef51-2

It looks good and I'm sure it will do the job just right. I already have a positive experience with GPM steering knuckles which I also purchased on Aliexpress. These Hex adapters/extenders are not made by GPM but I think they will be fine. I don't have any experience with the Team Associated extenders, but I'm sure they will be fine too. I've heard that they have a little bit of play (more than the stock hubs), but I think once you are going with extended hubs, you will always have more play. Because it stresses the bearing more.

 

[iLikeRCs]

I ordered 2 x this part from Aliexpress:

https://nl.aliexpress.com/item/RC-Auto-Deel-LEGERING-3-MM-HEX-ADAPTERS-voor-1-8-ARRMA-TYPHON-SENTON-TALION-KRATON/32876644505.html?spm=a2g0z.search0604.3.17.74c84e0f98IYgN&ws_ab_test=searchweb0_0,searchweb201602_4_10065_10068_319_317_10696_10084_453_10083_454_10618_10304_10307_10820_10821_10301_537_536_10902_10843_10059_10884_10887_321_322_10103,searchweb201603_45,ppcSwitch_0&algo_pvid=45bd2d6b-415b-4538-9ce7-5b2cd3c2ef51&algo_expid=45bd2d6b-415b-4538-9ce7-5b2cd3c2ef51-2

It looks good and I'm sure it will do the job just right. I already have a positive experience with GPM steering knuckles which I also purchased on Aliexpress. These Hex adapters/extenders are not made by GPM but I think they will be fine. I don't have any experience with the Team Associated extenders, but I'm sure they will be fine too. I've heard that they have a little bit of play (more than the stock hubs), but I think once you are going with extended hubs, you will always have more play. Because it stresses the bearing more.

so do they fit/work just fine or are there any Issues?