Typhon Typhon V2 motor mount

[WatahBoy]

I have a Typhon 6S V2 running a Hobbywing 4985SL 1650kv motor. The motor is a little too big and the shaft side of the can is touching the chassis which is not letting the motor mount sit flush with the chassis. The buggy runs with no problems but there is tension on the motor shaft/ motor mount. My question is would the V5/V6 Typhon motor mount solve the problem? Thanks in advance!

 

[Yonic]

Yes. The v4-5-6 motor mount puts the motor higher.

 

[WatahBoy]

Thanks